MAX504CPD+

MAXIM INTEGRATED PRODUCTS  MAX504CPD+  数模转换器, 低功率, 10 bit, 串行, 4.5V 至 5.5V, DIP, 14 引脚

The is a low power, voltage output, serial 10bit digital to analogue converter DAC in 14 pin DIP package. It is specified for single +5V power supply operation and can also be operated with ±5V supplies. The MAX504 with 2.048V internal reference draws only 260µA of supply current. It is trimmed for offset voltage, gain and linearity. Hence, no further adjustment is necessary. The internal op-amp of MAX504 can be configured for gain of 1 or 2 as well as for unipolar or bipolar output voltages. The device can also be used as a four quadrant multiplier without external resistors or op-amp. It is typically used in battery powered test instruments, digital offset and gain adjustment machine and motion control devices.

.

Supply voltage range from 4.5V to 5.5V

.

Operating temperature range from 0°C to 70°C

.

Compatible with SPI, QSPI and Microwire interfaces

.

Buffered voltage output, power-on reset

.

INL of ±0.5LSB and DNL of ±1LSB monotonic with single +5V supply

.

Unipolar offset error of 3LSB and unipolar offset tempco of 3ppm/°C with single +5V supply

.

Flexible output ranges from 0V to VDD and VSS to VDD

.

Serial data output for daisy chaining

.

Gain error of ±1LSB and gain error tempco of 1ppm/°C with single +5V supply

.

Output load regulation of 0.5LSB at VOUT = 2V, RL = 2Kohm with single +5V supply