MCP102系列 2.63V 80 ms 微功耗 电压监控器-SOT23B-3
MCP102 微控制器监控和重置电路
MCP102 是电压监控器,可通过低边响应重置引脚在停电事件中保持微控制器或其他设备处于重置状态。
### 特点
超低电源电流:1.75 μA(最大稳态电压)
在功率损失事件中重置微控制器
RST 引脚:低边响应,推挽式
重置延时计时器(120 ms 延时,典型值)
### 监控和重置电路 - Microchip
欧时:
Microchip MCP102T-270E/TT 电压监控器, 2.564 至 2.696 V监控电压, 低电平有效, 3引脚 SOT-23B封装
立创商城:
MCP102T-270E/TT
得捷:
IC SUPERVISOR 1 CHANNEL SOT23-3
艾睿:
In the event that a core processor fails in your circuit, the MCP102T-270E/TT processor from Microchip Technology supervisory ensures that there is a backup to take over. This part has an operating temperature range of -40 °C to 125 °C. It has a typical reset threshold voltage of 2.63 V, with a minimum of 2.591 V and a maximum of 2.67 V. This device has a minimum operating supply voltage of 1 V and a maximum of 5.5 V.
Allied Electronics:
Microchip MCP102T-270E/TT, Voltage Supervisor 2.564 to 2.696 V, 3-Pin SOT-23B
安富利:
Volt Supervisor Supply 2.63V 3-Pin SOT-23B T/R
Chip1Stop:
Volt Supervisor Supply 2.63V 3-Pin SOT-23B T/R
Verical:
Processor Supervisor 2.63V 1 Active Low/Push-Pull 3-Pin SOT-23 T/R
Newark:
# MICROCHIP MCP102T-270E/TT Voltage Detector, 1V-5.5V supply, 2.63V Threshold, 120 ms Delay, Active-Low, Push-Pull, SOT-23B-3
DeviceMart:
IC SUPERVISOR 2.63V LOW SOT-23B
电源电压DC 1.00V min
供电电流 0.00175 mA
静态电流 1.00 µA
阈值电压 2.63 V
复位电压Min 2.591 V
复位电压Max 2.67 V
工作温度Max 125 ℃
工作温度Min -40 ℃
电源电压Max 5.5 V
电源电压Min 1 V
安装方式 Surface Mount
引脚数 3
封装 SOT-23-3
长度 3.04 mm
宽度 1.4 mm
高度 1.02 mm
封装 SOT-23-3
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC版本 2015/12/17
ECCN代码 EAR99