MPC866TCZP100A

MPU PowerQUICC MPC8xx Processor RISC 32Bit 0.18um 100MHz 3.3V 357Pin BGA Tray

Overview

MPC866 PowerQUICC™ Family is a 0.18 micron version of the MPC862 PowerQUICC® Family and can operate up to 133 MHz on the MPC8xx core with a 66 MHz external bus. The MPC866 Family has a 1.8 V core and has a 3.3 V I/O operation with 5 V TTL compatibilty. The MPC866 Integrated Communications Controller Family is a versatile one-chip integrated microprocessor and peripheral combination that can be used in a variety of controller applications. It particularly excels in both communications and networking systems.

The MPC866 Family is a a Power Architecture-based derivative of Our Quad Integrated Communications Controller PowerQUICC. The CPU on the MPC866 is the MPC8xx core, a 32-bit microprocessor built on Power Architecture technology, incorporating memory management units MMUs and instruction and data caches. The MPC866P is the superset of this family of devices.

MoreLess

## Features

Embedded MPC8xx core up to 133 MHz

* Maximum frequency operation of the external bus is 66 MHz

* Single-issue, 32-bit core compatible with Power Architecture technology with 32, 32-bit general-purpose registers GPRs

* The MPC866 Family provides enhanced ATM functionality as found on the MPC862. The MPC866 adds major new features available in "enhanced SAR" ESAR mode, including the following:

* Improved operation, administration and maintenance OAM support

* OAM performance monitoring PM support

* Multiple APC priority levels available to support a range of traffic pace requirements

* Port-to-port switching capability without the need for RAM-based microcode

* Simultaneous MII 100Base-T and UTOPIA half-duplex capability

* Optional statistical cell counters per PHY

* UTOPIA level 2 compliant interface with added FIFO buffering to reduce the total cell transmission time. The earlier UTOPIA level 1 specification is also supported.

* Parameter RAM for both SPI and I2C can be relocated without RAM-based microcode

* Supports full-duplex UTOPIA both master ATM side and slave PHY side operation using a "split" bus

* AAL2/VBR functionality is ROM-resident

* Up to 32-bit data bus dynamic bus sizing for 8, 16, and 32 bits

* 32 address lines

* Memory controller eight banks

* General-purpose timers

* Fast Ethernet controller FEC

* System integration unit SIU

* Interrupts

* Communications processor module CPM

* Four baud rate generators

* Four SCCs serial communication controllers

* Two SMCs serial management channels

* One SPI serial peripheral interface

* One I2C inter-integrated circuit port

* Time-slot assigner TSA

* Parallel interface port PIP

* PCMCIA interface

* Debug interface

* 1.8 V Core and 3.3 V I/O operation with 5-V TTL compatibility

* 357-pin ball grid array BGA package

## Features Comparison Table

### MPC866 Family Versions and Masks

| Qual | Process | Mask | IMMR [16:31]

\---|---|---|---|---

**Rev 0.3** | MC | HiP6W | 3L90H | 0x0800

**Rev A.0** | MC | HiP6W | 0L96R | 0x0801

Note 1: Where nn = 50, 66, 100, or 133