ARM Cortex-M4 闪存：128K@x8bit RAM：64KB
Overview
The KS22 MCU is based on the ARM® Cortex®-M4 core with 120MHz MCUs with FPU, offering full-speed USB 2.0 OTG, in addition to other features like USB crystal-less functionality. Devices have 128 KB and 256 KB of flash, 64 KB SRAM as well as LQFP and QFN packages. These devices offer various levels of integration, with a rich suite of analog, communication, timing and control peripherals.
MoreLess
## Features
### Ultra-Low-Power
* 10 low-power modes with power and clock gating for optimal peripheral activity and recovery times
* Full memory and analog operation down to 1.71 volts for extended battery life
* Low-leakage wake-up unit with up to eight internal modules and 16 pins as wake-up sources in low-leakage stop LLS/very low-leakage stop VLLS modes
* Low-power timer for continual system operation in reduced power state
### Flash, SRAM and FlexMemory
* 128 KB-256 KB Flash. Fast access, high reliability with four-level security protection
* 64 KB SRAM
### Performance
* ARM Cortex-M4 core + DSP. 120 MHz, single-cycle MAC, single instruction multiple data SIMD extensions, single precision floating point unit
* Up to 16-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput
* Cross bar switch enables concurrent multi-master bus accesses, increasing bus bandwidth
### Mixed-Signal Capability
* 16-bit analog-to-digital converters ADCs with configurable resolution. Single or differential output mode operation for improved noise rejection. 500 ns conversion time achievable with programmable delay block triggering
* 12-bit digital-to-analog converters DACs for analog waveform generation for audio applications
* high-speed comparators providing fast and accurate motor over-current protection by driving PWMs to a safe state
### Timing and Control
* Up tp 3 PWM and 1 TMR, can be operated in low-power mode
* Four-channel 32-bit periodic interrupt timer provides time base for RTOS task scheduler or trigger source for ADC conversion and programmable delay block
### Human-Machine Intergace HMI
* Up to 66 controllable GPIO with pin interrupt support
### Connectivity and Communications
* USB 2.0 On-The-Go full-speed with USB crystal-less functionality
* 1x LPUART that can be operated in low-power mode, 3x UART that support IrDA, one of them support ISO7816 smart card. Support different data side, format, and send/receive settings, compatible with multiple industry communication protocols
* 2x Inter-IC Sound I2S serial interface for audio system interfacing
* 2x CAN module for industrial network bridging
* 2x SPI
* 2x LPI2C, can be operated in low-power mode
* 1x FlexIO module that can be configured as different interface e.g. UART/SPI/I2C/I2S, support operating in low-power mode
### Reliability, Safety and Security
* Cyclic redundancy check engine validates memory contents and communication data, increasing system reliability
* Independent-clocked COP guards against clock skew or code runaway for fail-safe applications such as the IEC 60730 safety standard for household appliances
* External watchdog monitor drives output pin to safe state external components if watchdog event occurs