MC9S08QE8CTGR

8位微控制器 -MCU 8KB Flash, 512Ram

Overview

The S08QE family, comprised of a pin-compatible 8-bit and 32-bit device duo, is Our first family in the Flexis series. The Flexis series of controllers is the connection point of the ® Controller Continuum where 8- and 32-bit compatibility become reality.

The S08QE128 pushes the boundaries of the 8-bit architecture performance with 128 KB of flash, 24 analog-to-digital converter ADC channels and delivering up 25 MHz in bus frequency.  The 32-bit MCF51QE128 is pin-, peripheral- and tool-compatible with the 8-bit S08QE128 device. They share a common set of peripherals and development tools, delivering the ultimate in migration flexibility.

MoreLess

## Features

### Power-Saving Features

* Two ultra-low-power stop modes, one of which allows limited use of peripherals

* New low-power run and wait modes

* 6 µs typical wake up time from stop mode

* Internal clock Source ICS—module containing a frequency locked-loop FLL controlled by internal or external reference

* Oscillator OSC—loop-control Pierce oscillator

* crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz

* Clock gating disables clocks to unused peripherals

### 8-bit HCS08 Central Processing Unit CPU

* Up to 20 MHZ HCS08 CPU from 1.8V to 3.6V and across temperature range of -40°C to +85°C

* HCS08 instruction set with added BGND instruction

* Support for up to 32 interrupt/reset sources

### On-Chip Memory

* Up to 128 KB flash read/program/erase over full operating voltage and temperature

* Up to 8 KB random-access memory RAM

### Peripherals

* Two analog comparator ACMP

* Option to compare to an internal reference

* Output can be optionally routed to TPM as input capture trigger

* Analog Digital Converter ADC

* Up to 24-channel

* 12-bit resolution

* 2.5 µs conversion time

* Automatic compare function

* 1.7 mV/°C temperature sensor

* Internal bandgap reference channel

* Operation in low-power stop3

* 2x Serial communications interface SCI

* Two modules 0ffering asynchronous communications

* 13-bit break option

* Flexible baud rate generator

* Double buffered transmit and receive

* Optional H/W parity checking and generation

* Up to 2x Serial Peripheral Interfaces SPI

* Two modules with full-duplex or single-wire bidirectional

* double-buffered transmit and receive

* master or slave mode

* MSB-first or LSB-first shifting

* Timer/pulse-width modulator TPM

* One 6-channel TMP3

* Two 3-channel TPM1 and TPM2

* Selectable input capture

* Output compare

* Or buffered edge- or center-aligned PWM on each channel

* Two I2C

* Up to 100 kbps with maximum bus loading

* Multi-master operation

* Programmable slave address

* Interrupt-driven byte-by-byte data transfer

* Supports broadcast mode and 10-bit addressing

### Input/Output

* Up to 70 GPIO General Purpose Input/Output, one input-only and one output-only pin

* 16 Keyboard Interrupts KBI pins with selectable polarity

### System Protection

* Watchdog computer operating properly COP reset with option to run from dedicated 1 kHz internal clock source or bus clock

* Low-voltage detection with reset or interrupt, selectable trip points

* Illegal op code detection with reset

* Flash block protection

### Development Support

* Single-wire background debug interface

* Breakpoint capability

* ICE debug module —debug module supports both tag and force breakpoints

* Three comparators

* Nine trigger modes

* Eight deep FIFO for storing change-of-flow addresses and event-only data

* Supports both tag and force breakpointsComparison Table

### MC9S08QE Family Members

| ADC Channels

S08QE32| | | | | | | | |

S08QE8| | | | | | | | |

S08QE64| | | | | | | | |

MCF51QE| | | | | | | | |

S08QE4| | | | | | | | |

S08QE96| | | | | | | | |

S08QE128| | | | | | | | |

S08QE16| | | | | | | | |