OMAPL138EZWTD4E

C674x DSP+Arm 处理器 - 456MHz 361-NFBGA -40 to 90

Description

The OMAP-L138 C6000 DSP+ARM processor is a low-power applications processor based on an ARM926EJ-S and a C674x DSP core. This processor provides significantly lower power than other members of the TMS320C6000™ platform of DSPs.

OMAP-L138 C6000 DSP+ARM Processor

Features

• Dual-Core SoC

– 375- and 456-MHz ARM926EJ-S™ RISC MPU

– 375- and 456-MHz C674x Fixed- and Floating Point VLIW DSP

• ARM926EJ-S Core

– 32- and 16-Bit Thumb® Instructions

– DSP Instruction Extensions

– Single-Cycle MAC

– ARM Jazelle® Technology

– Embedded ICE-RT™ for Real-Time Debug

• ARM9™ Memory Architecture

– 16KB of Instruction Cache

– 16KB of Data Cache

– 8KB of RAM Vector Table

– 64KB of ROM

• C674x Instruction Set Features

– Superset of the C67x+ and C64x+ ISAs

– Up to 3648 MIPS and 2746 MFLOPS

– Byte-Addressable 8-, 16-, 32-, and 64-Bit Data

– 8-Bit Overflow Protection

– Bit-Field Extract, Set, Clear

– Normalization, Saturation, Bit-Counting

– Compact 16-Bit Instructions

• C674x Two-Level Cache Memory Architecture

– 32KB of L1P Program RAM/Cache

– 32KB of L1D Data RAM/Cache

– 256KB of L2 Unified Mapped RAM/Cache

– Flexible RAM/Cache Partition L1 and L2

• Enhanced Direct Memory Access Controller 3EDMA3:

– 2 Channel Controllers

– 3 Transfer Controllers

– 64 Independent DMA Channels

– 16 Quick DMA Channels

– Programmable Transfer Burst Size

• TMS320C674x Floating-Point VLIW DSP Core

– Load-Store Architecture with Nonaligned Support

– 64 General-Purpose Registers 32-Bit

– Six ALU 32- and 40-Bit Functional Units

• Supports 32-Bit Integer, SP IEEE Single Precision/32-Bit and DP IEEE Double Precision/64-Bit Floating Point

• Supports up to Four SP Additions Per Clock, Four DP Additions Every Two Clocks

• Supports up to Two Floating-Point SP or DP Reciprocal Approximation RCPxP and Square-Root Reciprocal Approximation RSQRxP Operations Per Cycle

– Two Multiply Functional Units:

• Mixed-Precision IEEE Floating-Point Multiply Supported up to:

– 2 SP x SP → SP Per Clock

– 2 SP x SP → DP Every Two Clocks

– 2 SP x DP → DP Every Three Clocks

– 2 DP x DP → DP Every Four Clocks

• Fixed-Point Multiply Supports Two 32 x 32-Bit Multiplies, Four 16 x 16-Bit Multiplies, or Eight 8 x 8-Bit Multiplies per Clock Cycle, and Complex Multiples

– Instruction Packing Reduces Code Size

– All Instructions Conditional

– Hardware Support for Modulo Loop Operation

– Protected Mode Operation

– Exceptions Support for Error Detection and Program Redirection

Software Support

– DSP BIOS™

– Chip Support Library and DSP Library

128KB of RAM Shared Memory

1.8-V or 3.3-V LVCMOS I/Os Except for USB and DDR2 Interfaces

Two External Memory Interfaces:

– EMIFA

  • NOR 8- or 16-Bit-Wide Data

  • NAND 8- or 16-Bit-Wide Data

  • 16-Bit SDRAM with 128-MB Address Space

– DDR2/Mobile DDR Memory Controller with one of the following:

  • 16-Bit DDR2 SDRAM with 256-MB Address Space

 

Applications

• Professional or Private Mobile Radio PMR

• Remote Radio Unit RRU

• Remote Radio Head RRH

• Industrial Automation

• Currency Inspection

• Biometric Identification

• Machine Vision Low-End

• Smart Grid Substation Protection

• Industrial Portable Navigation Devices