高速运算放大器 Dual Lo Pwr Vltg Op Amp
The OPA2889 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities give exceptional full-power bandwidth. Using a dual ±5V supply, the OPA2889 can deliver a ±4V output swing with over 40mA drive current and 60MHz bandwidth. This combination of features makes the OPA2889 an ideal RGB line driver or single-supply analog-to-digital converter ADC input driver or low power twisted pair line receiver.
The low 460µA/ch supply current of the OPA2889 is precisely trimmed at +25°C. System power may be reduced further using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, operates the OPA2889 normally. If pulled LOW, the OPA2889 supply current drops to less than 20µA/ch while the output goes into a high-impedance state.
输出电流 35mA @5V
供电电流 920 µA
电路数 2
通道数 2
共模抑制比 58 dB
输入补偿漂移 20.0 µV/K
带宽 75 MHz
转换速率 250 V/μs
增益频宽积 70 MHz
输入补偿电压 1.5 mV
输入偏置电流 150 nA
可用通道 S, D
工作温度Max 85 ℃
工作温度Min -40 ℃
3dB带宽 115 MHz
增益带宽 75 MHz
共模抑制比Min 58 dB
安装方式 Surface Mount
引脚数 10
封装 VSSOP-10
长度 3 mm
宽度 3 mm
高度 1.02 mm
封装 VSSOP-10
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
OPA2889IDGSR TI 德州仪器 | 当前型号 | 当前型号 |
OPA2889IDGST 德州仪器 | 类似代替 | OPA2889IDGSR和OPA2889IDGST的区别 |
OPA2889IDGSTG4 德州仪器 | 类似代替 | OPA2889IDGSR和OPA2889IDGSTG4的区别 |
OPA2889IDGSRG4 德州仪器 | 类似代替 | OPA2889IDGSR和OPA2889IDGSRG4的区别 |