1.5A , 24V , 17MHz功率运算放大器 1.5A, 24V, 17MHz POWER OPERATIONAL AMPLIFIER
The OPA564 is a low-cost, high-current operational amplifier that is ideal for driving up to 1.5A into reactive loads. The high slew rate provides 1.3MHz full-power bandwidth and excellent linearity. These monolithic integrated circuits provide high reliability in demanding powerline communications and motor control applications.
The OPA564 operates from a single supply of 7V to 24V, or dual power supplies of ±3.5V to ±12V. In single-supply operation, the input common-mode range extends to the negative supply. At maximum output current, a wide output swing provides a 20VPP IOUT = 1.5A capability with a nominal 24V supply.
The OPA564 is internally protected against over-temperature conditions and current overloads. It is designed to provide an accurate, user-selected current limit. Two flag outputs are provided; one indicates current limit and the second shows a thermal over-temperature condition. It also has an Enable/Shutdown pin that can be forced low to shut down the output, effectively disconnecting the load.
The OPA564 is housed in a thermally-enhanced, surface-mount PowerPAD™ package HSOP-20 with the choice of the thermal pad on either the top side or the bottom side of the package. Operation for both versions is specified over the industrial temperature range, –40°C to +85°C.
供电电流 39 mA
电路数 1
通道数 1
共模抑制比 70 dB
输入补偿漂移 10.0 µV/K
转换速率 40.0 V/μs
增益频宽积 17 MHz
输入补偿电压 20 mV
输入偏置电流 0.1 nA
工作温度Max 85 ℃
工作温度Min 40 ℃
增益带宽 17 MHz
共模抑制比Min 70 dB
电源电压Max 24 V
电源电压Min 7 V
安装方式 Surface Mount
引脚数 20
封装 HSOP-20
长度 12.82 mm
宽度 7.52 mm
高度 2.35 mm
封装 HSOP-20
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
OPA564AIDWDR TI 德州仪器 | 当前型号 | 当前型号 |
OPA564AIDWPR 德州仪器 | 类似代替 | OPA564AIDWDR和OPA564AIDWPR的区别 |
OPA564AIDWD 德州仪器 | 类似代替 | OPA564AIDWDR和OPA564AIDWD的区别 |
OPA564AQDWPRQ1 德州仪器 | 类似代替 | OPA564AIDWDR和OPA564AQDWPRQ1的区别 |