OPTEK TECHNOLOGY OPF562 光纤接收器, 5MB, ST
The is a 125MHz high speed Fibre Optic Receiver for communication designs. The output of the receiver is analog, low impedance, emitter follower voltage source capable of driving an amplifier or level translating circuitry. This allows the subsequent circuitry to use the device in either the analog mode or translated to ECL/TTL levels for use in a digital mode at data rates up to 155MBd. The receiver is comprised of a high speed, low noise, photodiode coupled to a trans-impedance amplifier which produces an output voltage proportional to the input light amplitude. This hybrid approach solves many of the problems of high speed data link designs by placing a pre-amplifier close to the photodiode. The amplification of the trans-impedance amplifier makes the output signal much less susceptible to EMI.
供电电流 15 mA
波长 840 nm
峰值波长 840 nm
上升时间 6.3 ns
输出电流Max 25 mA
下降时间 3.3 ns
下降时间Max 6.3 ns
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 4.75V ~ 5.25V
安装方式 Through Hole
引脚数 3
封装 TRAY
长度 12.7 mm
宽度 7.98 mm
高度 20.5 mm
封装 TRAY
产品生命周期 Active
包装方式 Bulk
制造应用 Communications & Networking, Fibre Optics, 通用, Fibre Optics, Communications & Networking
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/12/17
ECCN代码 EAR99