ANALOG DEVICES OP413FSZ 运算放大器, 四路, 3.4 MHz, 4个放大器, 1.2 V/µs, ± 2V 至 ± 18V, WSOIC, 16 引脚
The is a quad Operational Amplifier features low noise and drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but it cannot correct for temperature drifts and noise. Optimized for this parameter, the OPx13 family can be used to take advantage of superior analog performance combined with digital correction. The OPx13 family is unity gain stable and has a typical gain bandwidth product of 3.4MHz. Slew rate is in excess of 1V/µs. Noise density is a very low 4.7nV/√Hz and noise in the 0.1 to 10Hz band is 120nV p-p. Input offset voltage is guaranteed and offset drift is guaranteed to be less than 0.8µV/°C. Input common-mode range includes the negative supply and to within 1V of the positive supply over the full supply range. Phase reversal protection is designed into the OPx13 family for cases where input voltage range is exceeded.
供电电流 3 mA
电路数 4
通道数 4
针脚数 16
共模抑制比 90 dB
带宽 3.4 MHz
转换速率 1.20 V/μs
增益频宽积 3.5 MHz
输入阻抗 42.0 MΩ
输入补偿电压 275 µV
输入偏置电流 240 nA
工作温度Max 85 ℃
工作温度Min -40 ℃
增益带宽 3.4 MHz
共模抑制比Min 90 dB
电源电压Max 36 V
电源电压Min 4 V
安装方式 Surface Mount
引脚数 16
封装 SOIC-16
宽度 7.6 mm
封装 SOIC-16
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tube
制造应用 测试与测量, 便携式器材, 多媒体, Portable Devices, Test & Measurement, Multimedia
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
军工级 No
REACH SVHC版本 2015/12/17
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
OP413FSZ ADI 亚德诺 | 当前型号 | 当前型号 |
OP413FSZ-REEL 亚德诺 | 完全替代 | OP413FSZ和OP413FSZ-REEL的区别 |
OP413FS 亚德诺 | 完全替代 | OP413FSZ和OP413FS的区别 |
OP413ESZ 亚德诺 | 类似代替 | OP413FSZ和OP413ESZ的区别 |