TEXAS INSTRUMENTS OPA2171AQDGKRQ1 运算放大器, AEC-Q100, 3 MHz, 2个放大器, 1.5 V/µs, 2.7V 至 36V, ± 1.35V 至 ± 18V, VSSOP, 8 引脚 新
The OPA171-Q1 family of devices is a 36-V, single-supply, low-noise operational amplifier op amp with the ability to operate on supplies ranging from 2.7 V ±1.35 V to 36 V ±18 V. This device is available in micro-packages and offers low offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
All trademarks are the property of their respective owners.
Unlike most op amps, which are specified at only one supply voltage, the OPAx171-Q1 family of devices is specified from 2.7 to 36 V. Input signals beyond the supply rails do not cause phase reversal. The OPAx171-Q1 family of devices is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the top rail during normal operation. The device can operate with full rail-to-rail input 100 mV beyond the top rail, but with reduced performance within 2 V of the top rail.
The OPAx171-Q1 op amp is specified from –40°C to +125°C.
输出电流 25 mA
供电电流 475 µA
电路数 2
针脚数 8
共模抑制比 90 dB
输入补偿漂移 300 nV/K
带宽 3 MHz
转换速率 1.50 V/μs
增益频宽积 3 MHz
输入补偿电压 250 µV
输入偏置电流 8 pA
工作温度Max 125 ℃
工作温度Min -40 ℃
共模抑制比Min 90 dB
安装方式 Surface Mount
引脚数 8
封装 VSSOP-8
封装 VSSOP-8
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Cut Tape CT
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC版本 2015/06/15