OM13062,598

NXP  OM13062,598  演示电路板, LPC11U37H LPCXpresso 微控制器, CorteX-M0, Arduino UNO平台, 微型SD卡槽

The is a LPCXpresso11U37H Board an extended variant of the standard LPCXpresso V2 board design, designed to allow evaluation of the I/O handler functionality available on LPC11U37HFBD64. The I/O handler is a software library-supported hardware engine that can be used to add performance, connectivity and flexibility to system designs. The I/O handler can emulate serial interfaces such as UART, I²C and I²S with no or very low additional CPU load and can off-load the CPU by performing processing-intensive functions like DMA transfers in hardware.

.

On-board LPC-Link2 based debug probe, based on LPC43xx MCU

.

Debug connector to allow debug of target MCU via an external probe

.

Can be configured to act as a standalone probe to allowing debugging of an external board

.

Tri-colour LED, ISP and WAKE buttons

.

Connector for target MCU"s USB device peripheral

.

MCU pins available on standard LPCXpresso/mbed expansion connector

.

Arduino connectors compatible with the "Arduino UNO" platform

.

P3 allows measurement of current of all target side circuitry

.

microSD card slot

.

UART connector, 6-pin FTDI cable TTL-232R-3V3 compatible

.

IOH I²C expander card with eight LEDs

.

DALI expander card