OPA4314AQPWRQ1

OPA4314AQPWRQ1图片1
OPA4314AQPWRQ1图片2
OPA4314AQPWRQ1图片3
OPA4314AQPWRQ1图片4
OPA4314AQPWRQ1图片5
OPA4314AQPWRQ1概述

4 通道、3MHz、低电压、汽车级运算放大器 14-TSSOP -40 to 125

The OPAx314-Q1 series is a family of single-, and dual-, and quad-channel operational amplifiers op-amps that represents a new generation of low-power, general-purpose CMOS amplifiers. Rail-to-rail input and output swings, low quiescent current 150 µA typically at 5 VS combined with a wide bandwidth of 3 MHz, and very low noise 14 nV/√Hz at 1 kHz make this device family very attractive for a variety of battery-powered applications that require a good balance between cost and performance. The low input bias current supports applications with mega-ohm source impedances.

The robust design of the OPAx314-Q1 series provides ease-of-use to the circuit designer: unity-gain stability with capacitive loads of up to 300 pF, an integrated RF/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostatic discharge ESD protection 4-kV HBM.

The device is optimized for low-voltage operation as low as 1.8 V ±0.9 V and up to 5.5 V ±2.75 V, and is specified over the full extended temperature range of –40°C to +125°C.

The single-channel device, OPA314-Q1, is offered in the SOT-23 package and the dual-channel device, OPA2314-Q1, is offered in the VSSOP 8 package. The quad-channel OPA4314-Q1 is available in the 14-pin TSSOP package.

OPA4314AQPWRQ1中文资料参数规格
技术参数

输出电流 20 mA

供电电流 150 µA

电路数 1

输入补偿漂移 1.00 µV/K

转换速率 1.50 V/μs

增益频宽积 3 MHz

输入偏置电流 0.0000002μA @5.5V

工作温度Max 125 ℃

工作温度Min -40 ℃

共模抑制比Min 66 dB

封装参数

安装方式 Surface Mount

引脚数 14

封装 TSSOP-14

外形尺寸

封装 TSSOP-14

物理参数

工作温度 -40℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tape & Reel TR

符合标准

RoHS标准 RoHS Compliant

含铅标准 无铅

数据手册

OPA4314AQPWRQ1引脚图与封装图
OPA4314AQPWRQ1引脚图
OPA4314AQPWRQ1封装图
OPA4314AQPWRQ1封装焊盘图
在线购买OPA4314AQPWRQ1
型号: OPA4314AQPWRQ1
制造商: TI 德州仪器
描述:4 通道、3MHz、低电压、汽车级运算放大器 14-TSSOP -40 to 125

锐单商城 - 一站式电子元器件采购平台