PCA9539RGER

TEXAS INSTRUMENTS  PCA9539RGER  输入/输出扩展, 16bit, 400 kHz, I2C, SMBus, 2.3 V, 5.5 V, VQFN

The is a 16-bit I/O Expander for the two-line bidirectional bus I²C is designed for 2.3 to 5.5V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I²C interface [serial clock SCL, serial data SDA]. The PCA9539 consists of two 8-bit configuration input or output selection, input port, output port and polarity inversion active-high or active-low operation registers. At power-on, the I/Os are configured as inputs. The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding Input or output register. The polarity of the input port register can be inverted with the polarity inversion register. All registers can be read by the system master. The system master can reset the PCA9539 in the event of a time-out or other improper operation by asserting a low in the RESET input.

.

Open-drain active-low interrupt INT\ output

.

Active-Low Reset Input

.

Compatible with most microcontrollers

.

Polarity inversion register

.

Address by 2 hardware address pins for use of up to 4 devices

.

Latched outputs with high-current drive capability for directly driving LEDs

.

Latch-up performance exceeds 100mA per JESD 78, class II

.

5V Tolerant i/o ports

.

1µA Maximum low standby-current consumption

.

Green product and no Sb/Br

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.