PIC 32MHz 闪存：22K@x24bit RAM：16KB
Special Microcontroller Features:
• Operating Voltage Range of 2.0V to 3.6V
• Self-Reprogrammable under Software Control
• 5.5V Tolerant Input digital pins only
• Configurable Open-Drain Outputs on Digital I/O
• High-Current Sink/Source 18 mA/18 mA on all I/O
• Selectable Power Management modes:
\- Sleep, Idle and Doze modes with fast wake-up
• Fail-Safe Clock Monitor Operation:
\- Detects clock failure and switches to on-chip FRC oscillator
• On-Chip LDO Regulator
Power Management:
• On-Chip 2.5V Voltage Regulator
• Switch between Clock Sources in Real Time
• Idle, Sleep and Doze modes with Fast Wake-up and
Two-Speed Start-up
• Run mode: 1 mA/MIPS, 2.0V Typical
• Standby Current with 32 kHz Oscillator: 2.6 A, 2.0V Typical
• Power-on Reset POR, Power-up Timer PWRT,
Low-Voltage Detect LVD and Oscillator Start-up Timer
OST
• Flexible Watchdog Timer WDT with On-Chip
Low-Power RC Oscillator for Reliable Operation
• In-Circuit Serial Programming™ ICSP™ and
In-Circuit Debug ICD via 2 Pins
• JTAG Boundary Scan Support
• Brown-out Reset BOR
• Flash Program Memory:
\- 10,000 erase/write cycle endurance minimum
\- 20-year data retention minimum
\- Selectable write protection boundary
\- Write protection option for Flash Configuration Words
High-Performance CPU:
• Modified Harvard Architecture
• Up to 16 MIPS Operation at 32 MHz
• 8 MHz Internal Oscillator
• 17-Bit x 17-Bit Single-Cycle Hardware Multiplier
• 32-Bit by 16-Bit Hardware Divider
• 16 x 16-Bit Working Register Array
• C Compiler Optimized Instruction Set Architecture with Flexible Addressing modes
• Linear Program Memory Addressing, Up to 12 Mbytes
• Linear Data Memory Addressing, Up to 64 Kbytes
• Two Address Generation Units for Separate Read and Write Addressing of Data Memory
Analog Features:
• 10-Bit, Up to 16-Channel Analog-to-Digital A/D Converter at 500 ksps:
\- Conversions available in Sleep mode
• Three Analog Comparators with Programmable Input/Output Configuration
• Charge Time Measurement Unit CTMU