Power Supply; AC-DC; 24V; 0.5A; 110-295V In; Enclosed; LED Driver; 12W; PLM-12 Series
PLM-12 is a 12W economical AC/DC LED power supply series. Incorporating a built-in active PFC design, PLM-12 provides a high Power Factor value greater than 0.9. In addition, with the low no load power consumption below 0.5W, and the setup time less than 500mS, PLM-12 is complied with the ErP regulation required by European Union for lighting fixtures.
PLM-12 is a class II without FG pin power unit housed with the UL 94V-0 rated flame retardant plastic case. The I/O terminals are designed with screw-less clamp style terminal block that greatly simplifies the wiring installation. Two types of models with different input voltage range are offered: PLM-12 series, which operates from 110-295VAC, and PLM-12E series, which operates from 180-295VAC. These two series are both constant current output design, supplying models with the current of 350mA, 500mA, 700mA and 1050mA, respectively.
230 VAC only or Full range up to 295 VAC models available
Built-in active PFC function
Constant current design
Short circuit protection
Cooling by free air convection
Fully isolated plastic case
Class II power unit, no FG
Class 2 power unit blank type only
No load power consumption less than 0.5 W
High reliability, low cost
2 years warranty
额定功率 12 W
输出接口数 1
输出电压 24 VDC
输出电流 0.5 A
输出功率 12 W
输出电流Max 500 mA
输入电流Min 0.15 A
输出功率Max 12 W
工作温度Max 50 ℃
工作温度Min -30 ℃
电源电压 110.295VAC, 156.416VDC
输入电压 156VDC ~ 417VDC, 110VAC ~ 295VAC
引脚数 4
封装 Plastic Enclosure
封装 Plastic Enclosure
重量 126 g
工作温度 -30℃ ~ 50℃
RoHS标准 RoHS Compliant
含铅标准 Lead Free
ECCN代码 EAR99
HTS代码 8504409510