RE46C167SW16TF

CMOS光电感烟探测器ASIC与互连，定时器模式和报警记忆 CMOS Photoelectric Smoke Detector ASIC with Interconnect, Timer Mode and Alarm Memory

Description

The RE46C165/6/7/8 devices are low-power, CMOS photoelectric type, smoke detector ICs. With minimal external components, these circuits will provide all the required features for a photoelectric type smoke detector.

Each design incorporates a gain selectable photo amplifier for use with an infrared emitter/detector pair. An internal oscillator strobes power to the smoke detection circuitry for 100 µs every 10 seconds to keep standby current to a minimum. If smoke is sensed, the detection rate is increased to verify an alarm condition. A high gain mode is available for push button chambertesting.

Features

• Temporal Horn Pattern or Continuous Tone

• Alarm Memory

• Sensitivity Control Times:

   - 9 minutes RE46C165/6

   - 1.2 minutes RE46C167/8

• I/O Filter and Charge Dump

• Interconnect up to 40 Detectors

• Internal Power-on Reset

• >2000V ESD Protection HBM on All Pins

• Low Quiescent Current Consumption <8 µA

• Internal Low Battery Detection and Chamber Test

• RoHS Compliant Lead-Free Packaging