80mΩ, 1.5A/0.6A High-Side Power Switches with Flag
General Description
The RT9711A/B/C/D are cost-effective, low voltage, single N-MOSFET high-side power switches, optimized for self powered and bus-powered Universal Serial Bus USB applications. The RT9711 series are equipped with a charge pump circuitry to drive the internal MOSFET switch. The switch"s low RDSON, 80mΩ, meets USB voltage drop requirements. A flag output is available to indicate fault conditions to the local USB controller.
Features
Compliant to USB Specifications
Built-In N-MOSFET
Typical RDSON: 80mΩ SOT-23-5 & TSOT-23-5 and 90mΩ SOP-8 & MSOP-8
Output Can Be Forced Higher Than Input Off-State
Low Supply Current :
25μA Typical at Switch On State
1μA Typical at Switch Off State
Guaranteed 1.5A for RT9711A/B and 0.6A for RT9711C/D Continuous Load Current
Wide Input Voltage Ranges : 2.5V to 5.5V
Open-Drain Fault Flag Output
Hot Plug-In Application Soft-Start
1.7V Typical Under-Voltage Lockout UVLO
Current Limiting Protection
Thermal Shutdown Protection
Reverse Current Flow Blocking no body diode
Smallest SOT-23-5 and TSOT-23-5 Packages
Minimizes Board Space
UL Approved−E219878
TUV IEC60950-1 : 2005Certified
RoHS Compliant and 100% Lead Pb-Free
Applications
USB Bus/Self Powered Hubs
USB Peripherals
ACPI Power Distribution
PC Card Hot Swap
Notebook, Motherboard PCs
Battery-Powered Equipment
Hot-Plug Power Supplies
Battery-Charger Circuits