HEX缓冲器和线路驱动器,具有三态输出 HEX BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
Buffer, Non-Inverting 2 Element 2, 4 Hex Bit per Element 3-State Output 16-TSSOP
得捷:
IC BUFFER NON-INVERT 6V 16TSSOP
立创商城:
SN74HC367PWT
德州仪器TI:
6-ch, 2-V to 6-V buffers with 3-state outputs
贸泽:
Buffers & Line Drivers Hex Buff & Line Drv w/3-State Outputs
e络盟:
TEXAS INSTRUMENTS SN74HC367PWT Buffer, 3-State, Non-Inverting, 2 V to 6 V, TSSOP-16
艾睿:
This SN74HC367PWT buffer and line driver from Texas Instruments is used to amplify an analog or digital signal by driving the input to the transmission line. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 85 °C. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 2 V, while its maximum is 6 V. It has 6 channels per chip.
安富利:
Buffer/Line Driver 6-CH Non-Inverting 3-ST CMOS 16-Pin TSSOP T/R
Verical:
Buffer/Line Driver 6-CH Non-Inverting 3-ST CMOS 16-Pin TSSOP T/R
电源电压DC 2.00V ~ 6.00V
输出接口数 6
通道数 5
针脚数 16
位数 6
传送延迟时间 20.0 ns
电压波节 6.00 V, 5.00 V, 2.00 V
输出电流驱动 -1.00 mA
输入数 6
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 2V ~ 6V
电源电压Max 6 V
电源电压Min 2 V
安装方式 Surface Mount
引脚数 16
封装 TSSOP-16
长度 5.1 mm
宽度 4.5 mm
高度 1.05 mm
封装 TSSOP-16
工作温度 -40℃ ~ 85℃ TA
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74HC367PWT TI 德州仪器 | 当前型号 | 当前型号 |
SN74HC367PW 德州仪器 | 类似代替 | SN74HC367PWT和SN74HC367PW的区别 |
SN74HC367PWR 德州仪器 | 类似代替 | SN74HC367PWT和SN74HC367PWR的区别 |