NOR Flash Serial-SPI 3V/3.3V 128M-bit 16M x 8 8ns 8Pin SOIC Tray
128 Mbit 16 Mbyte MirrorBit® Flash Non-Volatile Memory CMOS 3.0 Volt Core
Serial Peripheral Interface with Multi-I/O
General Description
The S25FL127S device is a flash non-volatile memory product using:
■ MirrorBit technology - that stores two data bits in each memory array transistor
■ Eclipse architecture - that dramatically improves program and erase performance
■ 65 nm process lithography
This device connects to a host system via a Serial Peripheral Interface SPI. Traditional SPI single bit serial input and output SIngle I/O or SIO is supported as well as optional two bit Dual I/O or DIO and four bit Quad I/O or QIO serial commands. This multiple width interface is called SPI Multi-I/O or MIO.
Features
■ Density
– 128 Mbits 16 Mbytes
■ Serial Peripheral Interface SPI
– SPI Clock polarity and phase modes 0 and 3
– Extended Addressing: 24- or 32-bit address options
– Serial Command set and footprint compatible with S25FL-A, S25FL-K, and S25FL-P SPI families
– Multi I/O Command set and footprint compatible with S25FL-P SPI family
■ READ Commands
– Normal, Fast, Dual, Quad
– AutoBoot - power up or reset and execute a Normal or Quad read command automatically at a preselected address
– Common Flash Interface CFI data for configuration information.
■ Programming 0.8 Mbytes/s
– 256- or 512-byte Page Programming buffer options
– Quad-Input Page Programming QPP for slow clock systems
■ Erase 0.5 Mbytes/s
– Hybrid sector size option - physical set of sixteen 4-kbyte sectors at
top or bottom of address space with all remaining sectors of
64 kbytes
– Uniform sector option - always erase 256-kbyte blocks for software compatibility with higher density and future devices.
■ Cycling Endurance
– 100,000 Program-Erase Cycles per sector minimum
■ Data Retention
– 20 Year Data Retention typical
■ Security features
– One Time Program OTP array of 1024 bytes
– Block Protection:
– Status Register bits to control protection against program or erase of a contiguous range of sectors.
– Hardware and software control options
– Advanced Sector Protection ASP
– Individual sector protection controlled by boot code or password
■ Spansion® 65 nm MirrorBit Technology with Eclipse™ Architecture
■ Supply Voltage: 2.7V to 3.6V
■ Temperature Range:
– Industrial -40°C to +85°C
– Automotive In-Cabin -40°C to +105°C
■ Packages all Pb-free
– 8-lead SOIC 208 mil
– 8-contact USON 6 x 5 mm
– BGA-24 6 x 8 mm
– 5 x 5 ball FAB024 and 4 x 6 ball FAC024 footprint options
– Known Good Die and Known Tested Die