STM8S003K3T6CTR

STM8S003K3T6CTR 编带

The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. They are referred to as low-density devices in the STM8S microcontroller family reference manual RM0016.

The STM8S003F3/K3 value line devices provide the following benefits: performance, robustness and reduced system cost.

Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.

The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.

Full documentation is offered as well as a wide choice of development tools.

**Key Features**

.

Core

.

16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline

.

Extended instruction set

.

Memories

.

Program memory: 8 Kbyte Flash memory; data retention 20 years at 55 °C after 100 cycles

.

RAM: 1 Kbyte

.

Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles

.

Clock, reset and supply management

.

2.95 V to 5.5 V operating voltage

.

Flexible clock control, 4 master clock sources

.

Low-power crystal resonator oscillator

.

External clock input

.

Internal, user-trimmable 16 MHz RC

.

Internal low-power 128 kHz RC

.

Clock security system with clock monitor

.

Power management

.

Low-power modes wait, active-halt, halt

.

Switch-off peripheral clocks individually

.

Permanently active, low-consumption power-on and power-down reset

.

Interrupt management

.

Nested interrupt controller with 32 interrupts

.

Up to 27 external interrupts on 6 vectors

.

Timers

.

Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

.

16-bit general purpose timer, with 3 CAPCOM channels IC, OC or PWM

.

8-bit basic timer with 8-bit prescaler

.

Auto wakeup timer

.

Window and independent watchdog timers

.

Communications interfaces

.

UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode

.

SPI interface up to 8 Mbit/s

.

I2 C interface up to 400 Kbit/s

.

Analog to digital converter ADC

.

10-bit ADC, ± 1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog

.

I/Os

.

Up to 28 I/Os on a 32-pin package including 21 high-sink outputs

.

Highly robust I/O design, immune against current injection

.

Development support

.

Embedded single-wire interface module SWIM for fast on-chip programming and non-intrusive debugging