STM32L151RBT6ATR

STMICROELECTRONICS  STM32L151RBT6ATR  微控制器, 32位, 超低功率, ARM 皮质-M3, 32 MHz, 128 KB, 32 KB, 64 引脚, LQFP

The ultra-low-power STM32L151x6/8/B-A and STM32L152x6/8/B-A devices incorporate the connectivity power of the universal serial bus USB with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz 33.3 DMIPS, a memory protection unit MPU, high-speed embedded memories Flash memory up to 128 Kbytes and RAM up to 32 Kbytes and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L151x6/8/B-A and STM32L152x6/8/B-A devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB. The STM32L151x6/8/B-A and STM32L152x6/8/B-A devices offer up to 20 capacitive sensing channels to simply add touch sensing functionality to any application.

They also include a real-time clock with sub-second counting and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller except STM32L151x6/8/B-A devices has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

The ultra-low-power STM32L151x6/8/B-A and STM32L152x6/8/B-A devices operate from a 1.8 to 3.6 V power supply down to 1.65 V at power down with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105°C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.

**Key Features**

.

Ultra-low-power platform

.

1.65 V to 3.6 V power supply

.

-40 °C to 105 °C temperature range

.

-40°C to 105°C temperature range

.

0.28 µA Standby mode 3 wakeup pins

.

1.11 µA Standby mode + RTC

.

0.44 µA Stop mode 16 wakeup lines

.

1.38 µA Stop mode + RTC

.

10.9 µA Low-power Run mode

.

185 µA/MHz Run mode

.

10 nA ultra-low I/O leakage

.

8 µs wakeup time

.

Core: ARM® Cortex® -M3 32-bit CPU

.

From 32 kHz up to 32 MHz max

.

1.25 DMIPS/MHz Dhrystone 2.1

.

Memory protection unit

.

Reset and supply management

.

Ultra-safe, low-power BOR brownout reset with 5 selectable thresholds

.

Ultra-low-power POR/PDR

.

Programmable voltage detector PVD

.

Clock sources

.

1 to 24 MHz crystal oscillator

.

32 kHz oscillator for RTC with calibration

.

High Speed Internal 16 MHz factory-trimmed RC +/- 1%

.

Internal low-power 37 kHz RC

.

Internal multispeed low-power 65 kHz to 4.2 MHz

.

PLL for CPU clock and USB 48 MHz

.

Pre-programmed bootloader

.

USART supported

.

Development support

.

Serial wire debug supported

.

JTAG and trace supported

.

Up to 83 fast I/Os 73 I/Os 5V tolerant, all mappable on 16 external interrupt vectors

.

Memories

.

Up to 128 Kbytes Flash memory with ECC

.

Up to 32 Kbytes RAM

.

Up to 4 Kbytes of true EEPROM with ECC

.

80-byte backup register

.

LCD Driver except STM32L151x6/8/B-A devices for up to 8x40 segments

.

Support contrast adjustment

.

Support blinking mode

.

Step-up converter on board

.

Rich analog peripherals down to 1.8 V

.

12-bit ADC 1 Msps up to 24 channels

.

12-bit DAC 2 channels with output buffers

.

2x ultra-low-power-comparatorswindow mode and wake up capability

.

DMA controller 7x channels

.

8x peripheral communication interfaces

.

1x USB 2.0 internal 48 MHz PLL

.

3x USART ISO 7816, IrDA

.

2x SPI 16 Mbits/s

.

2x I2C SMBus/PMBus

.

10x timers: 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers independent and window

.

Up to 20 capacitive sensing channels supporting touchkey, linear and rotary touch sensors

.

CRC calculation unit, 96-bit unique ID