SN65LVDS180PW

高速差分线路驱动器和接收 HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS

The is a high-speed differential Line Driver and Receiver for use with telecom infrastructure. The SN65LVDS180 device is differential line driver and receiver uses low-voltage differential signaling LVDS to achieve signaling rates as high as 400Mbps. The A/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247mV into a 100R load and receipt of 100mV signals with up to 1V of ground potential difference between a transmitter and receiver. This device offers various drivers, receiver and enabling combinations in industry-standard footprints. Because this device is intended for use in simplex or distributed simplex bus structures, the driver enable function does not put the differential outputs into a high-impedance state but rather disconnects the input and reduces the quiescent power used by the device.

.

Receiver has open-circuit failsafe design

.

150Mbps Full-duplex signalling rate

.

Bus-pin ESD exceeds 12kV

.

Low-voltage differential signaling with typical output voltage of 350mV and a 100R load

.

Propagation delay time - 1.7ns Typical driver and 3.7ns typical receiver

.

Power dissipation at 200MHz - 25mW Typical driver and 60mW typical receiver

.

Receiver maintains high input impedance with VCC<1.5V

.

LVTTL input levels are 5V tolerant

.

Green product and no Sb/Br