双复用LVDS转发 DUAL MULTIPLEXED LVDS REPEATERS
The SN65LVDS22 and SN65LVDM22 are differential line drivers and receivers that use low-voltage differential signaling LVDS to achieve signaling rates as high as 400 Mbps. The receiver outputs can be switched to either or both drivers through the multiplexer control signals S0 and S1. This allows the flexibility to perform splitter or signal routing functions with a single device.
The A/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100- load.
The intended application of these devices and signaling technique is for both point-to-point baseband single termination and multipoint double termination data transmissions over controlled impedance media. The transmission media may be printed-circuit board traces, backplanes, or cables. Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other application specific characteristics.
The SN65LVDS22 and SN65LVDM22 are characterized for operation from 40°C to 85°C.
电源电压DC 3.00V min
供电电流 27 mA
电路数 2
耗散功率 1110 W
数据速率 250 Mbps
输入电容 3 pF
输入电流Min 20 μA
工作温度Max 85 ℃
工作温度Min -40 ℃
耗散功率Max 1110 mW
电源电压 3V ~ 3.6V
电源电压Max 3.6 V
电源电压Min 3 V
安装方式 Surface Mount
引脚数 16
封装 SOIC-16
封装 SOIC-16
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tube
RoHS标准 RoHS Compliant
含铅标准 Lead Free
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN65LVDM22D TI 德州仪器 | 当前型号 | 当前型号 |
SN65LVDS122PW 德州仪器 | 完全替代 | SN65LVDM22D和SN65LVDS122PW的区别 |
SN65LVDS122D 德州仪器 | 完全替代 | SN65LVDM22D和SN65LVDS122D的区别 |
SN65LVDT122PW 德州仪器 | 完全替代 | SN65LVDM22D和SN65LVDT122PW的区别 |