SN74AUP1G125DBVR

TEXAS INSTRUMENTS  SN74AUP1G125DBVR.  芯片, 缓冲器/线驱动器, 非反相, 1路输出, 3.6V, SOT-23-5

缓冲器，非反向 元件 1 位每元件 三态 Output SOT-23-5

得捷:
IC BUF NON-INVERT 3.6V SOT23-5

立创商城:
SN74AUP1G125DBVR

德州仪器TI:
Single 0.8-V to 3.6-V low power buffer with 3-state outputs

e络盟:
缓冲器/线路驱动器, 74AUP1G125, 800 mV至3.6V, SOT-23-5

艾睿:
This SN74AUP1G125DBVR buffer and line driver from Texas Instruments is used to amplify an analog or digital signal by driving the input to the transmission line. With a 3-state output, this is power management at its best. This line driver has an operating temperature range of -40 °C to 85 °C. This component will be shipped in tape and reel packaging for effective mounting and safe delivery. This non-inverting device has a typical operating supply voltage of 1.8|2.5|3.3 V. Its minimum operating supply voltage of 0.8 V, while its maximum is 3.6 V. It has 1 channels per chip.

安富利:
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R

Chip1Stop:
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R

Verical:
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R

Newark:
# TEXAS INSTRUMENTS  SN74AUP1G125DBVR  Buffer / Line Driver, 74AUP1G125, 800 mV to 3.6 V, SOT-23-5

DeviceMart:
IC BUS BUFFER TRI-ST SOT23-5

Win Source:
IC BUS BUFFER TRI-ST SOT23-5