



















IC 缓存与线路驱动器 SN74HCT244PW TSSOP20 marking/标记 HB244
逻辑类型Logic Type| 非反相 Non-Inverting \---|--- 电路数Number of Circuits| 2 输入数Number of Inputs| 4 电源电压VccVoltage - Supply| 4.5 V ~ 5.5 V 静态电流IqCurrent - Quiescent Max| 6mA,6mA 输出高,低电平电流Current - Output High, Low| These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. When OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. 低逻辑电平Logic Level - Low| 这些八路缓冲器和线路驱动器是专门设计用于提高三态内存地址驱动器,时钟驱动器和总线型接收器和发射器的性能和密度。当OE是低电平时,器件通过非反相数据从A输入到Y输出。当OE高,产出是在高阻抗状态 高逻辑电平Logic Level - High| 传播延迟时间@Vcc,CLMax Propagation Delay @ V, Max CL| Description & Applications| 描述与应用|
电源电压DC 4.50V ~ 5.50V
输出接口数 8
通道数 8
针脚数 20
位数 8
传送延迟时间 32.0 ns
电压波节 5.00 V
输出电流驱动 -1.00 mA
输入数 8
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 4.5V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 4.5 V
安装方式 Surface Mount
引脚数 20
封装 TSSOP-20
长度 6.5 mm
宽度 4.4 mm
高度 1.15 mm
封装 TSSOP-20
工作温度 -40℃ ~ 85℃ TA
产品生命周期 Active
包装方式 Tube
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99



| 型号/品牌 | 代替类型 | 替代型号对比 |
|---|---|---|
SN74HCT244PW TI 德州仪器 | 当前型号 | 当前型号 |
SN74HCT244PWR 德州仪器 | 完全替代 | SN74HCT244PW和SN74HCT244PWR的区别 |
SN74HCT244PWT 德州仪器 | 完全替代 | SN74HCT244PW和SN74HCT244PWT的区别 |
SN74HCT244PWE4 德州仪器 | 完全替代 | SN74HCT244PW和SN74HCT244PWE4的区别 |