SN74AHC541PWRG4

八路缓冲器/驱动器，具有三态输出 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

description/ordering information

The ’AHC541 octal buffers/drivers are ideal for driving bus lines or buffer memory address registers. These devices feature inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.

Operating Range 2-V to 5.5-V VCC

Latch-Up Performance Exceeds 250 mA Per JESD 17

得捷:
IC BUF NON-INVERT 5.5V 20TSSOP

立创商城:
SN74AHC541PWRG4

德州仪器TI:
8-ch, 2-V to 5.5-V buffers with 3-state outputs

艾睿:
This SN74AHC541PWRG4 buffer and line driver from Texas Instruments is used to amplify an analog or digital signal by driving the input to the transmission line. With a 3-state output, this is power management at its best. This line driver has an operating temperature range of -40 °C to 125 °C. This product will be shipped in tape and reel packaging so that components can be mounted effectively. This non-inverting device has a typical operating supply voltage of 2.5|3.3|5 V. Its minimum operating supply voltage of 2 V, while its maximum is 5.5 V. It has 8 channels per chip.

Chip1Stop:
Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP T/R

Verical:
Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP T/R

Newark:
# TEXAS INSTRUMENTS  SN74AHC541PWRG4  Buffer / Line Driver, 74AHC541, 2 V to 5.5 V, TSSOP-20

Win Source:
IC BUFF/DVR TRI-ST 8BIT 20TSSOP