SN74LVT125QPWRG4Q1

3.3 -V ABT翻两番总线和三态输出缓冲器 3.3-V ABT QUADRUPLE BUS BUFFER WITH 3-STATE OUTPUTS

DESCRIPON/ORDERING INFORMATION

This bus buffer is designed specifically for low-voltage 3.3-V VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The SN74LVT125-Q1 features independent line drivers with 3-state outputs. Each output is in the high-impedance state when the associated output-enable OE input is high.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

FEATURES

• Qualified for Automotive Applications

• ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model C = 200 pF, R = 0

• Supports Mixed-Mode Signal Operation 5-V Input and Output Voltages With 3.3-V VCC

• Supports Unregulated Battery Operation Down to 2.7 V

• Typical VOLP Output Ground Bounce

   <0.8 V at VCC = 3.3 V, TA = 25°C

• Ioff Supports Partial-Power-Down Mode Operation

• Bus-Hold Data Inputs Eliminate the Need for External Pullup Resistors