10位缓冲器/驱动器,具有三态输出 10-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
These 10-bit buffers or bus drivers provide a high-performance bus interface for wide data paths or buses carrying parity.
The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable OE1\ or OE2\\\\ input is high, all ten outputs are in the high-impedance state. The "ABT827 provide true data at the outputs.
When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT827 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT827 is characterized for operation from -40°C to 85°C.
电源电压DC 4.50V ~ 5.50V
输出接口数 10
通道数 10
位数 10
传送延迟时间 4.80 ns
电压波节 5.00 V
静态电流 35 mA
输出电流驱动 -500 µA
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 4.5V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 4.5 V
安装方式 Surface Mount
引脚数 24
封装 TSSOP-24
长度 7.9 mm
宽度 4.5 mm
高度 1.05 mm
封装 TSSOP-24
工作温度 -40℃ ~ 85℃ TA
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74ABT827PWR TI 德州仪器 | 当前型号 | 当前型号 |
SN74ABT827PW 德州仪器 | 完全替代 | SN74ABT827PWR和SN74ABT827PW的区别 |
SN74ABT827PWG4 德州仪器 | 完全替代 | SN74ABT827PWR和SN74ABT827PWG4的区别 |
SN74ABT827PWE4 德州仪器 | 完全替代 | SN74ABT827PWR和SN74ABT827PWE4的区别 |