SN74F126DR

缓冲器和线路驱动器 Quad w/Tri-St Out

The SN74F126 bus buffer features independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable OE input is low.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

得捷:
IC BUF NON-INVERT 5.5V 14SOIC

立创商城:
SN74F126DR

德州仪器TI:
4-ch, 4.5-V to 5.5-V bipolar buffers with 3-state outputs

贸泽:
缓冲器和线路驱动器 Quad w/Tri-St Out

艾睿:
By driving the input to the transmission line this SN74F126DR buffer and line driver by Texas Instruments will amplify any signal. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of 0 °C and a maximum of 70 °C. Tape and reel packaging will encase the product during shipment, ensuring safe delivery and enabling quick mounting of components. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V. It has 4 channels per chip.

安富利:
Buffer/Line Driver 4-CH Non-Inverting 3-ST Bipolar 14-Pin SOIC T/R

Chip1Stop:
Buffer/Line Driver 4-CH Non-Inverting 3-ST Bipolar 14-Pin SOIC T/R

Verical:
Buffer/Line Driver 4-CH Non-Inverting 3-ST Bipolar 14-Pin SOIC T/R

Win Source:
IC BUS BUFF TRI-ST QD 14SOIC