具有三态输出的 3.3V ABT 16 位缓冲器/驱动器 48-SSOP -40 to 85
Buffer, Non-Inverting 4 Element 4 Bit per Element 3-State Output 48-SSOP
得捷:
IC BUF NON-INVERT 3.6V 48SSOP
立创商城:
SN74LVTH162241DLR
德州仪器TI:
16-ch, 2.7-V to 3.6-V buffers with bus-hold, TTL-compatible CMOS inputs and 3-state outputs
艾睿:
This SN74LVTH162241DLR buffer and line driver from Texas Instruments is used to amplify an analog or digital signal by driving the input to the transmission line. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 85 °C. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. It has 16 channels per chip. This non-inverting device has a typical operating supply voltage of 3.3 V. Its minimum operating supply voltage of 2.7 V, while its maximum is 3.6 V.
安富利:
Buffer/Line Driver 16-CH Non-Inverting 3-ST BiCMOS 48-Pin SSOP T/R
Chip1Stop:
Buffer/Line Driver 16-CH Non-Inverting 3-ST BiCMOS 48-Pin SSOP T/R
Verical:
Buffer/Line Driver 16-CH Non-Inverting 3-ST BiCMOS 48-Pin SSOP T/R
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74LVTH162241DLR TI 德州仪器 | 当前型号 | 当前型号 |
SN74LVTH162241DL 德州仪器 | 完全替代 | SN74LVTH162241DLR和SN74LVTH162241DL的区别 |
74LVTH162241DLG4 德州仪器 | 完全替代 | SN74LVTH162241DLR和74LVTH162241DLG4的区别 |
74LVTH162241DLRG4 德州仪器 | 完全替代 | SN74LVTH162241DLR和74LVTH162241DLRG4的区别 |