低功耗单路总线缓冲器具有三态输出门 LOW-POWER SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT
缓冲器,非反向 1 元件 1 位每元件 三态 Output SOT-23-5
立创商城:
SN74AUP1G125DBVT
德州仪器TI:
Single 0.8-V to 3.6-V low power buffer with 3-state outputs
得捷:
IC BUF NON-INVERT 3.6V SOT23-5
贸泽:
缓冲器和线路驱动器 Lo PWR SNGL Bus Bufr Gate
e络盟:
TEXAS INSTRUMENTS SN74AUP1G125DBVT Buffer, Non-Inverting, 3-State, 800mV to 3.6V, SOT-23-5
艾睿:
By driving the input to the transmission line this SN74AUP1G125DBVT buffer and line driver by Texas Instruments will amplify any signal. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 85 °C. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. It has 1 channels per chip. This non-inverting device has a typical operating supply voltage of 1.8|2.5|3.3 V. Its minimum operating supply voltage of 0.8 V, while its maximum is 3.6 V.
安富利:
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R
Chip1Stop:
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R
Verical:
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R
Newark:
# TEXAS INSTRUMENTS SN74AUP1G125DBVT Buffer, 74AUP1G125, 0.8 V to 3.6 V, SOT-23-5
电源电压DC 800mV min
输出接口数 1
通道数 1
针脚数 5
位数 1
传送延迟时间 4.60 ns
逻辑门个数 1
输入数 1
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 0.8V ~ 3.6V
电源电压Max 3.6 V
安装方式 Surface Mount
引脚数 5
封装 SOT-23-5
长度 2.9 mm
宽度 1.6 mm
高度 1.15 mm
封装 SOT-23-5
工作温度 -40℃ ~ 85℃ TA
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74AUP1G125DBVT TI 德州仪器 | 当前型号 | 当前型号 |
SN74AUP1G125DCKR 德州仪器 | 完全替代 | SN74AUP1G125DBVT和SN74AUP1G125DCKR的区别 |
SN74AUP1G125DRLR 德州仪器 | 完全替代 | SN74AUP1G125DBVT和SN74AUP1G125DRLR的区别 |
SN74AUP1G125YZPR 德州仪器 | 完全替代 | SN74AUP1G125DBVT和SN74AUP1G125YZPR的区别 |