八路缓冲器/驱动器,具有三态输出 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
缓冲器,反向 1 元件 8 位每元件 三态 Output 20-TSSOP
得捷:
IC BUFFER INVERT 3.6V 20TSSOP
立创商城:
SN74LVC540APWT
德州仪器TI:
8-ch, 1.65-V to 3.6-V inverters with 3-state outputs
贸泽:
缓冲器和线路驱动器 Octal Buffer/Driver W/3-State Output
e络盟:
TEXAS INSTRUMENTS SN74LVC540APWT Buffer / Driver, 3-State, Inverting, 1.65 V to 3.6 V, TSSOP-20
艾睿:
This SN74LVC540APWT buffer and line driver from Texas Instruments is used to amplify an analog or digital signal by driving the input to the transmission line. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 125 °C. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. This inverting device has a typical operating supply voltage of 1.8|2.5|3.3 V. Its minimum operating supply voltage of 1.65 V, while its maximum is 3.6 V. It has 8 channels per chip.
安富利:
Buffer/Line Driver 8-CH Inverting 3-ST CMOS 20-Pin TSSOP T/R
Chip1Stop:
Buffer/Line Driver 8-CH Inverting 3-ST CMOS 20-Pin TSSOP T/R
Verical:
Buffer/Line Driver 8-CH Inverting 3-ST CMOS 20-Pin TSSOP T/R
电源电压DC 2.00V ~ 3.60V
输出接口数 8
电路数 1
通道数 8
针脚数 20
位数 8
传送延迟时间 5.30 ns
电压波节 3.30 V, 2.70 V, 2.50 V, 1.80 V
输出电流驱动 -1.00 mA
输入数 8
工作温度Max 125 ℃
工作温度Min -40 ℃
电源电压 1.65V ~ 3.6V
电源电压Max 3.6 V
电源电压Min 1.65 V
安装方式 Surface Mount
引脚数 20
封装 TSSOP-20
长度 6.6 mm
宽度 4.5 mm
高度 1.05 mm
封装 TSSOP-20
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74LVC540APWT TI 德州仪器 | 当前型号 | 当前型号 |
SN74LVC540ADGVR 德州仪器 | 完全替代 | SN74LVC540APWT和SN74LVC540ADGVR的区别 |
SN74LVC540APWR 德州仪器 | 完全替代 | SN74LVC540APWT和SN74LVC540APWR的区别 |
SN74LVC540ADWR 德州仪器 | 完全替代 | SN74LVC540APWT和SN74LVC540ADWR的区别 |