10位缓冲器/驱动器,具有三态输出 10-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
缓冲器,非反向 1 元件 10 位每元件 三态 Output 24-TSSOP
得捷:
IC BUF NON-INVERT 3.6V 24TSSOP
立创商城:
SN74LVC827APWT
德州仪器TI:
10-ch, 1.65-V to 3.6-V buffers with 3-state outputs
艾睿:
By driving the input to the transmission line this SN74LVC827APWT buffer and line driver by Texas Instruments will amplify any signal. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 125 °C. In order to guarantee safe delivery and allow for quick mounting of this component after delivery, it will be enclosed in tape and reel packaging during shipment. It has 10 channels per chip. This non-inverting device has a typical operating supply voltage of 1.8|2.5|3.3 V. Its minimum operating supply voltage of 1.65 V, while its maximum is 3.6 V.
安富利:
Buffer/Line Driver 10-CH Non-Inverting 3-ST CMOS 24-Pin TSSOP T/R
Chip1Stop:
Buffer/Line Driver 10-CH Non-Inverting 3-ST CMOS 24-Pin TSSOP T/R
Verical:
Buffer/Line Driver 10-CH Non-Inverting 3-ST CMOS 24-Pin TSSOP T/R
力源芯城:
具有三态输出的 10 位缓冲器/驱动器
电源电压DC 2.00V ~ 3.60V
输出接口数 10
通道数 10
位数 10
传送延迟时间 6.70 ns
电压波节 3.30 V, 2.70 V, 2.50 V, 1.80 V
输出电流驱动 -1.00 mA
输入数 10
工作温度Max 125 ℃
工作温度Min -40 ℃
电源电压 1.65V ~ 3.6V
安装方式 Surface Mount
引脚数 24
封装 TSSOP-24
封装 TSSOP-24
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74LVC827APWT TI 德州仪器 | 当前型号 | 当前型号 |
SN74LVC827ADBR 德州仪器 | 完全替代 | SN74LVC827APWT和SN74LVC827ADBR的区别 |
SN74LVC827ADGVR 德州仪器 | 完全替代 | SN74LVC827APWT和SN74LVC827ADGVR的区别 |
SN74LVC827ADBRG4 德州仪器 | 完全替代 | SN74LVC827APWT和SN74LVC827ADBRG4的区别 |