八D型边沿触发触发器具有三态输出 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
元件 D 型 位 正边沿 20-SOIC(0.295",7.50mm 宽)
得捷:
IC FF D-TYPE SNGL 8BIT 20SOIC
立创商城:
SN74ACT564DWR
德州仪器TI:
Octal D-Type Edge-Triggered Flip-Flops With 3-State Outputs
艾睿:
If you are looking for a simple device that can store state information, look no further than Texas Instruments&s; SN74ACT564DWR flip flop device. It has a single-ended output signal. With a 3-state output, this is power management at its best. This flip flop has a minimum operating temperature of -40 °C and a maximum of 85 °C. In order to guarantee safe delivery and allow for quick mounting of this component after delivery, it will be enclosed in tape and reel packaging during shipment. This inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V. It has 8 channels per chip.
安富利:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC T/R
Chip1Stop:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC T/R
Verical:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC T/R
Newark:
# TEXAS INSTRUMENTS SN74ACT564DWR Flip-Flop, Tri State Inverted, Positive Edge, 74ACT564, D, 6.5 ns, 75 MHz, 24 mA, SOIC
Win Source:
IC FF D-TYPE SNGL 8BIT 20SOIC / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-SOIC 0.295", 7.50mm Width
频率 75 MHz
电源电压DC 4.50V ~ 5.50V
输出接口数 8
输出电流 24 mA
时钟频率 90 MHz
位数 8
传送延迟时间 11.5 ns
电压波节 5.00 V
输入电容 4.5 pF
输出电流驱动 -1.00 mA
输入数 8
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 4.5V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 4.5 V
安装方式 Surface Mount
引脚数 20
封装 SOIC-20
高度 2.35 mm
封装 SOIC-20
工作温度 -40℃ ~ 85℃ TA
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74ACT564DWR TI 德州仪器 | 当前型号 | 当前型号 |
SN74ACT564DW 德州仪器 | 类似代替 | SN74ACT564DWR和SN74ACT564DW的区别 |
SN74ACT564DWG4 德州仪器 | 类似代替 | SN74ACT564DWR和SN74ACT564DWG4的区别 |
SN74ACT564DWE4 德州仪器 | 类似代替 | SN74ACT564DWR和SN74ACT564DWE4的区别 |