STATUS SEM1600B 信号调节器, 桥接器/压力传感器, DIN轨安装
The is a Smart Powered Strain Bridge/Load Cell Conditioner for use with strain gauges or load cell signals. It has built-in capability to scale the input signal to a process value while the output stage offers either voltage, bipolar voltage or active/passive current re-transmission signals. Comes with AC/DC power supply that will operate in the range 10 to 48VDC and 10 to 32VAC making the device ideal for battery operation. An additional volt free contact input is available for tare setting using a remote switching. The high precision input stage of the device allows for a bridge excitation voltage of 5VDC to be used as opposed to the traditional 10VDC. This reduces the power requirement for the bridge supply and up to 4 bridges may be connected to the input.
- .
- Suitable for load cell/strain gauge applications
- .
- Universal current, bipolar voltage outputs
- .
- Input range - 0.2 to 7.5mV/V, 5V excitation
- .
- Powered 10 to 32VAC or 10 to 48VDC supply
- .
- 2 to 6 point calibration with active set option
- .
- Remote tare, front panel push button configuration
- .
- USB programmable