SC16C554DBIB64,151

NXP  SC16C554DBIB64,151  接口, UART, 4通道, 5 Mbps, 2.25 V, 2.75 V, LQFP, 64 引脚

The is a 4-channel Universal Asynchronous Receiver and Transmitter QUART used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5Mbps. It comes with an Intel 16 mode or Motorola 68 mode interface. The QUART is pin compatible with the ST16C554 and TL16C554 and it will power-up to be functionally equivalent to the 16C454. It features the 16-byte receive and transmit FIFOs, four receive trigger levels. It provides DMA mode data transfers through FIFO trigger levels and the TXRDY and RXRDY signals. On-board status registers provide the user with error indications, operational status and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.

.

16-byte Transmit FIFO

.

16-byte Receive FIFO with error flags

.

Programmable Auto-RTS\ and Auto-CTS\

.

In Auto-CTS\ mode, CTS\ controls transmitter

.

In auto-RTS\ mode, RX FIFO contents and threshold control RTS\

.

Automatic hardware flow control RTS\/CTS\\

.

Software selectable baud rate generator

.

Four selectable receive FIFO interrupt trigger levels

.

Standard modem interface

.

Standard asynchronous error and framing bits

.

False start-bit detection

.

Complete status reporting capabilities

.

3-state Output TTL drive capabilities for bidirectional data bus and control bus

.

Line break detection and generation

.

Loopback controls for communications link fault isolation

.

Prioritized interrupt system controls