SG1526J-883B

Voltage Mode PWM Controller 100mA 350kHz 18Pin CDIP

The SG1526 is a high performance monolithic pulse width modulator circuit designed for fixed-frequency switching regulators and other power control applications. Included in an 18-pin dual-in-line package are a temperature compensated voltage reference, sawtooth oscillator, error amplifier, pulse width modulator, pulse metering and steering logic, and two low impedance power drivers. Also included are protective features such as soft-start and under-voltage lockout, digital current limiting, double pulse inhibit, a data latch for single pulse metering, adjustable dead-time, and provision for symmetry correction inputs. For ease of interface, all digital control ports are TTL and B-series CMOS compatible. Active LOW logic design allows wired-OR connections for maximum flexibility. This versatile device can be used to implement single-ended or push-pull switching regulators of either polarity, both transformer-less and transformer coupled. The SG1526 is characterized for operation over the full military ambient junction temperature range of -55°C to +150°C. The SG2526 is characterized for operation from -25°C to +150°C, and the SG3526 is characterized for operation from 0°C to +125°C.

**

.

*

.

8 to 35 volt operation

.

5V reference trimmed to ±1%

.

1Hz to 350KHz oscillator range

.

Dual 100mA source/sink outputs

.

Digital current limiting

.

Double pulse suppression

.

Programmable dead-time

.

Under-voltage lockout

.

Single pulse metering

.

Programmable soft-start

.

Wide current limit common mode range

.

TTL/CMOS compatible logic ports

.

Symmetry correction capability

.

Guaranteed 6 unit synchronization