同步整流与抑制, 1.5A , 1.5 MHz的固定或可调,在DFN6 3x3的降压型开关稳压器 Synchronous rectification with inhibit, 1.5A, 1.5 MHz fixed or adjustable, step-down switching regulator in DFN6 3x3
Description
The ST1S06 is a step down DC-DC converter optimized for powering low-voltage digital core in HDD applications and, generally, to replace the high current linear solution when the power dissipation may cause an high heating of the application environment. It provides up to 1.5A over an input voltage range of 2.7V to 6V. An high switching frequency 1.5MHz allows the use of tiny surface-mount components: as well as the resistor divider to set the output voltage value, only an inductor and two capacitors are required. Besides, a low output ripple is guaranteed by the current mode PWM topology and by the use of low E.S.R. SMD ceramic capacitors.
General features
■ Step-down current mode PWM 1.5MHz DC-DC converter
■ 2% DC output voltage tolerance
■ Synchronous rectification
■ Inhibit function
■ Internal soft start
■ Typical efficiency:> 90%
■ 1.5A Output current capability
■ Not switching quiescent current: max 1.5mA over temperature range
■ RDSON typ150mΩ
■ Uses tiny capacitors and inductors
■ Operative junction temp. -30°C to 125°C
■ Available in DFN6 3x3 exposed pad
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
ST1S06PMR ST Microelectronics 意法半导体 | 当前型号 | 当前型号 |
ST1S06APUR 意法半导体 | 完全替代 | ST1S06PMR和ST1S06APUR的区别 |
ST1S06PUR 意法半导体 | 类似代替 | ST1S06PMR和ST1S06PUR的区别 |
ST1S03PUR 意法半导体 | 类似代替 | ST1S06PMR和ST1S03PUR的区别 |