Demonstration Kit For Single And Double Axis Gyroscopes In A 5 X 5mm Package
is designed for the evaluation of LPY503AL gyroscope. It includes a sensing element and an IC interface capable of translating information from the sensing element into a measured signal that can be used for external applications. In addition to the MEMS sensor, the board uses an ST7 microcontroller which functions as a bridge between the sensor and the PC. Board has been designed for use in two different working modes analog and digital. In analog modeAWM the microcontroller on the board is disabled and the analog outputs of the device are available to the user on a dedicated connector. This is the default working mode when the power supply is applied either through the USB connector or through the supply connector. In digital mode DWM the microcontroller on the board is enabled and it allows the user to digitally acquire the output signals of the device, to view them on the PC through the dedicated GUI, and to control the control pins of the device.
- .
- Graphical user interface
- .
- Two different working modes: Analog AWM and Digital DWM
- .
- Uses LPY503AL, ±30dps and ±120dps, dual axis pitch and yaw gyroscope