Mb9a310l, j-Link Adapter, Eval Board
is a low cost evaluation board based on the FM3 microcontroller MB9A310 series and JLink JTAG adapter. The MB9AF314L microcontroller on the board is already preprogrammed with a simple application. The MB9A310 series are a highly integrated 32bit microcontroller that target for high performance and cost sensitive embedded control applications. The MB9A310 series are based on the ARM Cortex-M3 processor and on chip flash memory and SRAM, and peripheral functions, including motor control timers, ADCs and communication interfaces USB, UART, CSIO, I2C, LIN. JLink is a USB powered JTAG emulator supporting a large number of CPU cores.
- .
- UART transceiver SUB D9 connector
- .
- USB to serial converter Type B connector
- .
- USB MiniHost Type A connector
- .
- USB Device Type B connector
- .
- JTAG interface on a 20 pin header
- .
- TSC interface
- .
- LED display 7 segment, User button, Reset button, Reset LED
- .
- All 64 pins routed to pin header
- .
- On board 5V and 3V voltage regulators, Power LED
- .
- Voltage filter for ADC
This board and its deliverables must only be used for test applications in an evaluation laboratory environment.