MCU 16Bit HCS12 HCS12 CISC 256KB Flash 2.5V/5V Automotive 112Pin LQFP Tray
The MC9S12HZ256 microcontroller units MCU are 16-bit devices composed of standard on-chip peripherals including a 16-bit central processing unit HCS12 CPU, up to 256K bytes of Flash EEPROM or ROM, up to 12K bytes of RAM, 2K bytes of EEPROM, two asynchronous serial communications interfaces SCI, a serial peripheral interface SPI, an IIC-bus interface IIC, an 8-channel 16-bit timer TIM, a 16-channel, 10-bit analog-to-digital converter ATD, a six-channel pulse width modulator PWM, and two CAN 2.0 A, B software compatible modules MSCAN. In addition, they feature a 32x4 liquid crystal display LCD controller/driver, a pulse width modulator motor controller MC consisting of 16 high current outputs suited to drive up to four stepper motors, and four stepper stall detectors SSD to simultaneously calibrate the pointer position of each motor. System resource mapping, clock generation, interrupt control, and external bus interfacing are managed by the HCS12 Core. The MC9S12HZ256 have full 16-bit data paths throughout. The inclusion of a PLL circuit allows power consumption and performance to be adjusted to suit operational requirements. In addition to the I/O ports available in each module, 8 general-purpose I/O pins are available with interrupt and wake-up capability from stop or wait mode.
Features
• HCS12 core
– 16-bit HCS12 CPU
Upward compatible with M68HC11 instruction set
Interrupt stacking and programmer’s model identical to M68HC11
16-bit ALU
Instruction queue
Enhanced indexed addressing
– MEBI multiplexed external bus interface
– MMC module mapping control
– INT interrupt control
– DBG debugger and breakpoints
– BDM background debug mode
• Memory
– 256K, 128K, 64K, 32K Flash EEPROM or ROM
– 2K, 1K byte EEPROM
– 12K, 6K, 4K, 2K byte RAM
• CRG low current oscillator, PLL, reset, clocks, COP watchdog, real time interrupt, clock monitor
• Analog-to-digital converter
– 16 channels, 10-bit resolution
– External conversion trigger capability
• Two 1-Mbps, CAN 2.0 A, B software compatible modules
– Five receive and three transmit buffers
– Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit or 8 x 8 bit
– Four separate interrupt channels for Rx, Tx, error and wake-up
– Low-pass filter wake-up function
– Loop-back for self test operation