ARM Cortex-M3 32MHz 闪存:32K@x8bit RAM:4KB
The ultra-low-power STM32L100C6 and STM32L100R8/RB devices incorporate the connectivity power of the universal serial bus USB with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz 33.3 DMIPS, a memory protection unit MPU, high-speed embedded memories Flash memory up to 128 Kbytes and RAM up to 10 Kbytes and an extensive range of enhanced I/Os and peripherals connected to two APB buses.
All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.
Moreover, the STM32L100C6 and STM32L100R8/RB devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB.
They also include a real-time clock with sub-second counting and a set of backup registers that remain powered in Standby mode.
Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.
The ultra-low-power STM32L100C6 and STM32L100R8/RB devices operate from a 1.8 to 3.6 V power supply. They are available in the -40 to +85 °C temperature range. A comprehensive set of power-saving modes allows the design of low-power applications.
**Key Features**
-
.
-
Ultra-low-power platform
-
.
-
1.8 V to 3.6 V power supply
-
.
-
-40°C to 85°C temperature range
-
.
-
0.3 µA Standby mode 2 wakeup pins
-
.
-
0.9 µA Standby mode + RTC
-
.
-
0.57 µA Stop mode 16 wakeup lines
-
.
-
1.2 µA Stop mode + RTC
-
.
-
9 µA Low-power run mode
-
.
-
214 µA/MHz Run mode
-
.
-
10 nA ultra-low I/O leakage
-
.
-
< 8 µs wakeup time
-
.
-
Core: 32-bit ARM® Cortex® -M3 CPU
-
.
-
From 32 kHz up to 32 MHz max
-
.
-
1.25 DMIPS/MHz Dhrystone 2.1
-
.
-
Memory protection unit
-
.
-
Reset and supply management
-
.
-
Ultra-safe, low-power BOR brownout reset with 5 selectable thresholds
-
.
-
Ultra-low-power POR/PDR
-
.
-
Programmable voltage detector PVD
-
.
-
Clock sources
-
.
-
1 to 24 MHz crystal oscillator
-
.
-
32 kHz oscillator for RTC with calibration
-
.
-
High-speed internal 16 MHz
-
.
-
Internal low-power 37 kHz RC
-
.
-
Internal multispeed low-power 65 kHz to 4.2 MHz
-
.
-
PLL for CPU clock and USB 48 MHz
-
.
-
Pre-programmed bootloader
-
.
-
USART supported
-
.
-
Development support
-
.
-
Serial wire debug supported
-
.
-
JTAG supported
-
.
-
Up to 51 fast I/Os 42 I/Os 5V tolerant, all mappable on 16 external interrupt vectors
-
.
-
Memories
-
.
-
Up to 128 Kbytes of Flash memory with ECC
-
.
-
Up to 10 Kbytes of RAM
-
.
-
Up to 2 Kbytes of true EEPROM with ECC
-
.
-
20-byte backup register
-
.
-
LCD Driver for up to 8x28 segments
-
.
-
Analog peripherals
-
.
-
12-bit ADC 1 Msps up to 20 channels
-
.
-
12-bit DAC 2 channels with output buffers
-
.
-
Two ultra-low-power comparators
-
.
-
Seven DMA controller channels
-
.
-
Eight communication interface peripherals
-
.
-
One USB 2.0
-
.
-
Three USARTs ISO 7816, IrDA
-
.
-
Two SPIs 16 Mbit/s
-
.
-
Two I2Cs SMBus/PMBus
-
.
-
Ten timers:
-
.
-
Six 16-bit timers with up to 4 IC/OC/PWM channels
-
.
-
Two 16-bit basic timers
-
.
-
Two watchdog timers independent and window
-
.
-
CRC calculation unit
-
.
-
All packages ECOPACK® 2