SN75ALS172A

四路差动线路驱动器

The comprises four line drivers with 3-state differential outputs. They are designed to meet the requirements of ANSI Standards EIA/A-422-B and RS-485 and ITU Recommendation V.11. This device is optimized for balanced multipoint bus transmission at rates of up to 20 Mbaud. Each driver features wide positive and negative common-mode output voltage ranges, making it suitable for party-line applications in noisy environments.

The SN75ALS172A provides positive- and negative-current limiting and thermal shutdown for protection from line-fault conditions on the transmission bus line. Shutdown occurs at a junction temperature of approximately 150°C.

The SN75ALS172A is characterized for operation from 0°C to 70°C.

H = high level, L = low level, X = irrelevant, Z = high impedance off

.

Meets or Exceeds ANSI Standards EIA/TIA-422-B and RS-485 and ITU Recommendation V.11

.

High-Speed Advanced Low-Power Schottky Circuitry

.

Designed for 20-MBaud Operation in Both Serial and Parallel Applications

.

Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments

.

Low Supply-Current Requirements: 55mAMax

.

Wide Positive and Negative Input/Output Bus-Voltage Ranges

.

Driver Output Capacity...±60 mA

.

Thermal Shutdown Protection

.

Driver Positive and Negative Current Limiting

.

Logically Interchangeable With SN75172