SN55LBC173

四路低功耗差动线路接收器

The is a monolithic quadruple differential line receiver with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device is optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The four receivers share two ORed enable inputs, one active when high, the other active when low. Each receiver features high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of 12 V to -7 V. Fail-safe design ensures that if the inputs are open circuited, the output is always high. The SN55LBC173 is designed using the Texas Instruments proprietary LinBiCMOSTM technology that provides low power consumption, high switching speeds, and robustness.

This device offers optimum performance when used with the SN55LBC172M quadruple line driver. The SN55LBC173 is available in the 16-pin CDIP J, the 16-pin CPAK W, or the 20-pin LCCC FK packages.

The SN55LBC173 is characterized over the military temperature range of -55°C to 125°C.

.

Meets EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11

.

Designed to Operate With Pulse Durations as Short as 20 ns

.

Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments

.

Input Sensitivity...±200 mV

.

Low-Power Consumption...20 mA Max

.

Open-Circuit Fail-Safe Design

.

Pin Compatible With SN75173 and AM26LS32

LinBiCMOS is a trademark of Texas Instruments.