SN65LVDS050

双路 LVDS 发送器/接收器

The SN65LVDS179, SN65LVDS180, , and SN65LVDS051 devices are differential line drivers and receivers that use low-voltage differential signaling LVDS to achieve signaling rates as high as 400 Mbps. The A/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.

These devices offer various driver, receiver, and enabling combinations in industry-standard footprints. Because these devices are intended for use in simplex or distributed simplex bus structures, the driver enable function does not put the differential outputs into a high-impedance state but rather disconnects the input and reduces the quiescent power used by the device. For these functions with a high-impedance driver output, see the SN65LVDM series of devices. All devices are characterized for operation from –40°C to 85°C.

.

Meets or Exceeds the Requirements of ANSI

TIA/EIA-644-1995 Standard

.

Full-Duplex Signaling Rates up to 150 Mbps

.

Bus-Pin ESD Exceeds 12 kV

.

Operates From a Single 3.3-V Supply

.

Low-Voltage Differential Signaling With Typical

Output Voltages of 350 mV and a 100-Ω Load

.

Propagation Delay Times

.

Driver: 1.7 ns Typical

.

Receiver: 3.7 ns Typical

.

Power Dissipation at 200 MHz

.

Driver: 25 mW Typical

.

Receiver: 60 mW Typical

.

LVTTL Input Levels Are 5-V Tolerant

.

Receiver Maintains High Input Impedance With

VCC < 1.5 V

.

Receiver Has Open-Circuit Fail Safe