TPS82671SIPT

非隔离步降（降压）电源模块，PTN、PTR、PTV、TPS 系列，Texas InstrumentsTexas Instruments 的一系列印刷电路板安装步降（降压）切换电压调节器模块。 这些产品提供高效节省空间的解决方案，用于不需要隔离的低功率降压直流-直流应用。### 非隔离电源模块，Texas Instruments非隔离电源模块支持需要卓越的 EMI 保护和热性能、高输出电流、高输出电压等的设计。 SIMPLE SWITCHER® 电源模块系列在小型、易于使用的封装中提供一体化电源解决方案，以满足极端工作条件或只需标准功能套件的要求。集成屏蔽式电感器 精密启动，软启动，跟踪排序 同类最佳的热性能 引脚至引脚兼容模块，用于不同的负载电流 易于使用的封装 通过 EN55022 CISPR22 B 类辐射和传导 EMI 标准

非隔离步降（降压）电源模块，PTN、PTR、PTV、TPS 系列，Texas Instruments

Texas Instruments 的一系列印刷电路板安装步降（降压）切换电压调节器模块。 这些产品提供高效节省空间的解决方案，用于不需要隔离的低功率降压直流-直流应用。

得捷:
DC DC CONVERTER 1.8V 1W

立创商城:
Vin=2.3V~4.8V Vout=1.8V 600mA

德州仪器TI:
600mA Fully Integrated, Low Noise Step-Down Converter Module in MicroSiP™ Package

欧时:
Texas Instruments TPS82671SIPT 直流-直流转换器, 降压, 2.3 → 4.8 V输入, 600mA最大输出, 5.5 MHz

贸泽:
Non-Isolated DC/DC Converters 600mA Fully Integr Step-Down Cnvrtr

艾睿:
Adjust the voltage level of your devices with this step down TPS82671SIPT DC to DC converter from Texas Instruments. This converter&s;s single output can produce a current up to 0.6 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 2.3 V that does not exceed 4.8 V. With a fixed output that has a voltage of 1.8 V, this is power management at its best. At a load regulation of -0.00085%/mATyp and line regulation of 0.23%/VTyp a constant current can be produced at the output of your circuit. This converter is 90 % efficient. Its switching regulator has a frequency of 4900 to 6000 kHz. Tape and reel packaging will encase this product during shipment, in order to ensure safe delivery and enable quick mounting of components. This converter has a minimum operating temperature of -40 °C and a maximum of 85 °C.

安富利:
Conv DC-DC Single Step Down 2.3V to 4.8V 8-Pin Micro SIP SMD T/R

Chip1Stop:
Module DC-DC 1-OUT 1.8V 0.6A 8-Pin uSIP T/R

Verical:
Conv DC-DC 2.3V to 4.8V Step Down Single-Out 1.8V 0.6A 8-Pin uSIP T/R

Newark:
# TEXAS INSTRUMENTS  TPS82671SIPT  IC, BUCK, 600MA, LN, 8USIP

Win Source:
DC/DC CONVERTER 1.8V 1W