TXB0106PWR

TEXAS INSTRUMENTS  TXB0106PWR  芯片, 电平转换器, TSSOP-16, 整卷

The is a 6-bit Bidirectional Voltage-level Translator with auto direction sensing and ±15kV ESD protection. This 6-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2, 1.5, 1.8, 2.5, 3.3 and 5V voltage nodes. VCCA should not exceed VCCB. When the output-enable OE input is low, all outputs are placed in the high-impedance state. The TXB0106 is designed so that the OE input circuit is supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

.

1.2 to 3.6V on A port and 1.65 to 5.5V on B port VCCA

.

VCC isolation feature

.

OE input circuit referenced to VCCA

.

Low power consumption, 4µA maximum ICC

.

Ioff supports partial power-down mode operation

.

Latch-up performance exceeds 100mA per JESD 78, class II

.

Green product and no Sb/Br

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.