TPS82673SIPT

TEXAS INSTRUMENTS  TPS82673SIPT  直流/直流转换器 隔离式板载, 2.3 V, 4.8 V, 1输出, µSIP, 8 引脚

非隔离 PoL 模块 直流转换器 输出 1.26V - - 600mA 2.3V - 4.8V 输入

得捷:
DC DC CONVERTER 1.26V 0.756W

德州仪器TI:
600mA Fully Integrated, Low Noise Step-Down Converter in MicroSiP™ Package

e络盟:
TEXAS INSTRUMENTS  TPS82673SIPT  直流/直流转换器 隔离式板载, 2.3 V, 4.8 V, 1输出, µSIP, 8 引脚

艾睿:
Adjust the voltage level of your devices with this step down TPS82673SIPT DC to DC converter from Texas Instruments. This converter&s;s single output can produce a current up to 0.6 A. This will operate at a minimum voltage of 2.3 V and a maximum voltage of 4.8 V, making it easy to control the power in your circuit. With a fixed output that has a voltage of 1.26 V, this is power management at its best. This converter is 90 % efficient. To produce a constant current at your output, supply your circuit with a load regulation of -0.00085%/mATyp and line regulation of 0.23%/VTyp. Its switching regulator has a frequency of 4900 to 6000 kHz. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. This converter has a minimum operating temperature of -40 °C and a maximum of 85 °C.

安富利:
Conv DC-DC Single Step Down 2.3V to 4.8V 8-Pin Micro SIP SMD T/R

Chip1Stop:
Conv DC-DC Single Step Down 2.3V to 4.8V 8-Pin uSIP T/R

Verical:
Conv DC-DC 2.3V to 4.8V Step Down Single-Out 1.26V 0.6A 8-Pin uSIP T/R

Newark:
# TEXAS INSTRUMENTS  TPS82673SIPT  Isolated Board Mount DC/DC Converter, 2.3 V, 4.8 V, 1 Output, µSIP, 8 Pins

DeviceMart:
IC REG BUCK SYNC 1.26V .6A 8USIP