TEXAS INSTRUMENTS TPS7A4533KTTR 固定电压稳压器, LDO, 2.1V至20V, 300mV压差, 3.3V输出, 1.5A输出, TO-263-5
LDO(低压降)线性稳压器,1.5A,TPS 系列,Texas Instruments
### LDO(低压降)线性稳压器,Texas Instruments
低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
立创商城:
TPS7A4533KTTR
得捷:
IC REG LINEAR 3.3V 1.5A DDPAK
德州仪器TI:
1.5-A, 20-V, ultra-low-dropout voltage regulator with reverse current protection & enable
欧时:
LDO(低压降)线性稳压器,1.5A,TPS 系列,Texas Instruments### LDO(低压降)线性稳压器,Texas Instruments低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
e络盟:
固定电压稳压器, LDO, 2.1V至20V, 300mV压差, 3.3V输出, 1.5A输出, TO-263-5
艾睿:
This LDO TPS7A4533KTTR linear regulator from Texas Instruments gives you control over the voltage levels of your circuit. Its typical dropout voltage at current is 0.02@1mA|0.085@100mA|0.17@500mA|0.3@1.5A V. It has an overall accuracy of ±1 %. This voltage regulation device&s;s single output can produce a current up to 1.5 A. The best way to provide power to your application is by using this, which needs a voltage of at least 1.9 V and no higher than 20 V. With a fixed output that has a voltage of 3.3 V, this is power management at its best. Using a load regulation of 20mV and line regulation of 10mV is needed for a programmable DC power supply. In order to guarantee safe delivery and allow for quick mounting of this component after delivery, it will be enclosed in tape and reel packaging during shipment. This voltage regulation device has an operating temperature range of -40 °C to 125 °C. The maximum dropout voltage is 0.05@1mA|0.1@100mA|0.18@500mA|0.35@1.5A V. Its polarity is positive.
安富利:
LDO Regulator Pos 3.3V 1.5A 6-Pin5+Tab TO-263 T/R
Chip1Stop:
Single Channel LDO Low-Noise Fast-Transient-Response 1.5-A LDO Regulator LDO Regulator Pos 3.3V 1.5A 6-Pin5+Tab TO-263 T/R
Verical:
LDO Regulator Pos 3.3V 1.5A 6-Pin5+Tab TO-263 T/R
Newark:
Fixed LDO Voltage Regulator, 2.1V to 20V, 300mV Dropout, 3.3Vout, 1.5Aout, TO-263-5
输出接口数 1
输出电压 3.3 V
输出电流 1.5 A
供电电流 1.5mA ~ 90mA
针脚数 5
静态电流 1 mA
输出电容类型 Ceramic
跌落电压 300 mV
调节输出数 1
输入电压Max 20 V
输入电压Min 2.1 V
输出电压Min 3.3 V
输出电流Max 1.5 A
工作温度Max 125 ℃
工作温度Min -40 ℃
精度 ±1 %
输入电压 ≤20 V
安装方式 Surface Mount
引脚数 5
封装 TO-263-6
长度 10.67 mm
宽度 4.83 mm
高度 11.33 mm
封装 TO-263-6
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TPS7A4533KTTR TI 德州仪器 | 当前型号 | 当前型号 |
TL1963A-33KTTR 德州仪器 | 类似代替 | TPS7A4533KTTR和TL1963A-33KTTR的区别 |
LT1963EQ-3.3 凌力尔特 | 类似代替 | TPS7A4533KTTR和LT1963EQ-3.3的区别 |
LT1963AEQ-3.3#PBF 凌力尔特 | 功能相似 | TPS7A4533KTTR和LT1963AEQ-3.3#PBF的区别 |